KeepGuard KG780NV Instruction Manual - page 17
17
Interval
10S (second)
(default, with a 60M
(minute) to 1S
(second) range of
settings available.)
(60M-1M are set in
one minute
increments,
59S-1S are set in
one second
increments)
Selects the length of time that the
camera will "wait" until it responds to
any additional triggers from the PIR
after an animal is first detected and
remains within the senso
r′s range.
During this user set "ignore triggers"
interval, the camera will not capture
photos/ videos. This prevents the card
from filling up with too many redundant
images. Settings begin with 10 second
default
when
parameter
is
first
selected. Note: after setting down
past 1S, settings start over at 60M.
Sensor
Level
Normal, High,
Low, Auto
Selects the sensitivity of the PIR
sensor. The
″High″ setting will make
the camera more sensitive to infrared
(heat) and more easily triggered by
motion, and the
″Low″ setting makes it
less sensitive to heat and motion. The
High setting can be useful when the
ambient temperature is warm (making
it more difficult for the sensor to detect
animals), and the Low setting may help
in cold weather if the camera is being
triggered too often by anything warmer
than the surroundings.
Time
Period Set
ON;OFF
This parameter defines a certain time
period in a day when the camera can
be triggered, while the rest of the time
the device is shut off. The effective
value ranges from 00:00 to 23:59.
Format
Execute
(followed
by
an
additional No/Yes)
Deletes (erases) all files stored on a
card to prepare it for reuse. Always
format a card that has been previously
used in other devices. Caution! Make
sure you have downloaded and
backed up any files you want to
preserve first! Press OK to execute
(then select Yes and press OK again
on color viewer models), press MENU
(or select NO then press OK) to exit
without formatting.