Keith McMillen Instruments QuNexus User Manual - page 5
Channel Rotation off:
Keyboard Layer
1. After entering CoMA Mode hit the desired
source button:
a. “Velo” button for note
b. “Pres” button for pressure
i.
skip to step 3
c. “Tilt” button for tilt
i.
skip to step 3
2. Hit the desired key to output a Note (use
octave buttons to switch octaves if necessary
for note mapping).
a. All keys in Keyboard Layer have the
same CC#s for Pressure or Tilt, so all
you need to do is press the source
button to output the MIDI message.
3. The key’s MIDI message will output.
4. If mapping multiple Notes, do so now just by
hitting the next key.
5. You can switch sources just by tapping the
button for the next source you want to map
(see step 1 and repeat).
Controller Layer
1. After entering CoMA Mode hit
the Togl A button to map
Controller Layer. The CoMA key
will flash blue.
2. Hit the desired source button:
a. “Velo” button for note
b. “Pres” button for pressure
c. “Tilt” button for tilt
3. Hit the desired key (octave
buttons don’t apply here
because MIDI in Controller Layer
doesn’t shift with the octave
buttons).
4. The key’s MIDI message will
output.
5. If mapping multiple notes or
CCs, do so now just by hitting
the next key.
6. You can switch sources just by
tapping the button for the next
source you want to map (see
step 2 and repeat).
5