Kelvinator KI420BFM2 User Manual - page 4
Do not tilt the refrigerator by more than 45 from an upright position when moving it.
Avoid collision and violent vibration during transportion.
Do not apply force to any part such as the condenser, the door and its handle
in order to prevent
frigerator from deforming, or else its performance will
be affected.
the re
Ensure that there is enough space around the refrigerator in order to let it work well.
1.
2.
3.
4.
5..
The refrigerator should be kept away from high temperature ,sunshine or humid
conditions.
The refrigerator should be placed on solid floor to avoid much noise.
For your safety and protection, this unit is grounded through the power cord plug
when plugged into a matching wall outlet. If you are not sure whether your wall
outlet properly grounded, please consult a qualified electrician..
Instructions for Installation
Instructions for Installation
3
Cleaning and Maintenance:
Cleaning and Maintenance:
Detergent
When cleaning the refrigerator , disconnect the electric wire . Rub it carefully
with a piece of cloth soaked with neutral cleanser , then wipe it clean with fresh
Water. Do not wash the refrigerator with water directly to prevent the unit from
rust and breakdown.
1.
Never use acids , chemical solution , thinner , gasoline or the likes to clean the
refrigerator because they may damage the painting cover and plastic parts of it
Once or twice a year dust the compressor at the back of the appliance with a
brush or vacuum cleaner, as an accumulation of dust will affect the performance
of the appliance and cause excessive electricity consumption.
.
2.
3
6