Kelvinator KI420BFM2 User Manual - page 6
° ² È « × ¢ Ò â Ê Ï î
When the refrigerator is not cool enough: ensure that
The thermostat is at the correct setting .
There are enough space around the refrigerator .
The doors are not opened too frequently and for too long .
The refrigerator is not under direct sunlight or placed near the heat source .
There are not too many foods and hot foods in the refrigerator.
2.
When the foods in the refrigerator is frozen: ensure that
The thermostat is at the correct setting .
There is not too much food that contains a lot of moisture in the refrigerator .
3.
The containers or solid packages stored inside are not touching each other .
When the refrigerator operates too noisily : ensure that
When there is a water leak on the ground : check if
When the compressor runs continuously without stopping : check if
The refrigerator is properly levelled .
The drain hole is blocked .
There are too much food in the refrigerator .
The refrigerator is not touching objects around it .
The drain hose in compressor compartment is not installed well.
The thermostat dial is at higher position such as 7 etc.
The door of refrigerator is opened too frequently.
The ventilation is not good around the refrigerator.
The door is not closed well or the door gasket is deformed.
4.
6.
7.
When the refrigerator does not run in winter : ensure that
The compensate switch is off. It should be turned on as the ambient
temperature is less than 10 degree.
5.
When the refrigerator does not operate :ensure that
The electric power is supplied and the voltage is normal.
The fuse is not burned out .
The power plug is plugged in firmly in the socket .
The thermostat setting is not in 0 position.
1.
Troubleshooting
7
This type of refrigerator is to be used for domestic purposes only.
Structure Illustration
General
2
1
2
3
4
5
6
7
8
9
10
11
12
Crisper Cover
4
Thermostat
1
Shelf
2
Drain Port
3
Crisper
5
Freezing Drawer
6
Drain hose (Back)
7
Compressor (Back)
8
Leveling Feet
9
Gasket
10
Bracket
11
Eggs bracket (Inside)
12