Kenitoo HD188 User Manual

Manual is about: MULTIMEDIA LCD PROJECTOR

Summary of HD188

  • Page 1

    ʹÓÃ˵Ã÷Êé ʹÓÃ˵Ã÷Êé multimedia lcd projector model :hd188 user's manual.

  • Page 2

    W a r n i n g safety precautions caution installation of projector full setting standard setting front projection) installation method input port instruction signalconnection map remote control instruction panel keystoke instruction open/close open operation close operation image trapezoid adjustmen...

  • Page 3: Specification

    Specification lcd model 5"tft input signal video component video s-video ypbpr ,vga hdmi sd and tv optional audio stereo output signal audio 5w 2 speaker(optional) lcd native resolution 800 3 600 support 720p 1080i) contrast ratio 600 1 lens aperture 3.8 focus 155mm lamp power 150w color-temperature...

  • Page 4

    Safety precautions warning; when use this projector ,please read this manual carefully. If wrong operation ,it will cause electric shock or fire.So when use and repair this projector ,please comply with the following points 1,read manual before use this projector ,please read full manual carefully a...

  • Page 5: Caution

    Trouble shooting please refer to this chapter when you encounter a problem list prior to contacting your dealer. Problem: possible solution(s): no power 1, the projector donot connect the power cable 2, donot open the projector . 3, fuse broken remote doesn't operate 1,projector turned on to quickly...

  • Page 6

    Projector installation please use the setup instruction below: speaker l subwoofer speaker c screen speaker r appreciate seats dvd amplifier projector speaker ls door speaker rs in order to get good image quality ,donot let the sunlight shine the screen directly .If you use the projector in the day ...

  • Page 7

    Maintenance replace the projector lamp our projector lamp warranty 6 months in different use environment after 6000hours the lamp brightness will reduce the image will become dark .Therefore please replace the lamp according to the following steps .Open the lamp cover board ¿ ÉÏ òÉ Ï³ é³ ö press thi...

  • Page 8

    Maintenance maintenance filter 1.Remove the grille like indicated below 2. Clear the dusty on the filter dry the filter sufficiently neverinstall a moist filter in this projector,and complete the installation the filter should be cleaned at least once a month (more often in dusty environments),or th...

  • Page 9

    On 4 3 4 english off hzoom vzoom hflip vflip on zoom1 zoom1 4:3 china input port instruction projector installation this projector can support component video signal, s-video signal,vga signal and tv signal,the audio in and audio out function. Menu setting 1 3 4 5 6 7 8 9 10 11 12 1. Indicator light...

  • Page 10

    50 projector install menu setting menu setting method 1. Using the projector press menu key, the picture disply on screen to adjust the menu(picture one) 2. Press key the menu entre into image > volume > function > system > setting > image adjust interface 3. Elect the adjust interface use key elect...

  • Page 11

    Adjust projector vol menu mode .Adjust patameter menu key open or switch the parameter menu tv/av switch the input signal image adjustment 1 turn the lens into the projector then turn it out slowly at the same time looking at the resolution point carefully when the image is very clearly (take the mi...

  • Page 12

    Panel keystoke instruction panel keystoke sketch map if the projector is the new one please read projector install chapter placed the projector connect the powerwire and the signelwire the operation as follow: 1.Before use the remoter . Put in two 7 size battery in it 2. Open the power switch on the...