Kenitoo HD188 User Manual - page 9
ON
4
3
4
ENGLISH
OFF
HZOOM
VZOOM
HFLIP
VFLIP
ON
ZOOM1
ZOOM1
4:3
CHINA
Input port instruction
Projector installation
This projector can support component video signal, s-video signal,VGA
signal and TV signal,the audio in and audio out function.
Menu setting
1
3
4
5
6
7
8
9 10 11
12
1. Indicator light
on stay situation the light is red
on working situation
the light is green
2. Panel key
use panel key to adjust parameter
read the introduce of the panel key
3. Remote control receiver
when use the remote control,please
point this receiver directly
4. Lens
adjust the lens focus to improve
the image quality
5. Adjust foot
use the projector on table to adjust
the elevation
6. Extend signal connect port
on the projector bottom panel have HDMI
SD
USB port .
7. Signal wire connect
connect projector signal source
read the signal port introduce
8. Power switch
when use ,you need connect the
power wire with projector and
the power jack
9. Fuse
if open the power switch,the indicator
light donot work,it maybe the fuse
broken
5A220V)
10. Power switch
open and shut off this switch
when you want to open the projector
it must open this switch at frist
11. ventilation
this ventlilation window is very important
donot block this window.otherwise
it will burn the projector
12. ventilation
two side of the projector have the ventilation
when use ,you must ensure do not block it