Kenitoo HD188 User Manual - page 11
adjust projector vol
menu mode .adjust patameter
Menu key
open or switch
the parameter menu
TV/AV
switch the input signal
Image adjustment
1 turn the lens into the projector then turn it out slowly
at the same time
looking at the resolution point carefully
when the image is very clearly (take the middle area of the image),it is the
best situation of the lens
Focus adjustment
The new projector
using it first time
commonly will
appear image faintness and the the image is trapezoid
it is course
that not adjust well of the lens focus and the trapezoid
please follow the step the correction
2
adjust the trapeziod correction key-press orthe key on the remote
untile the screen image become square
the trapezoid correction is
15degreen
if can not adjust all the trapezoid distortion
need to minish the uprightness distance
if use table
placed the projector can use the angle adjust key to change
the projector project angle
Trapeziod correction
Uprightness distance
Screen
projector
If can not adjust all the trapezoid distortion
need to minish the uprightness distance
Uprightness distance
Angle adjust
Screen
Projector
If can not adjust all the trapezoid diftortion
need to minish the uprightness distance
Precautions
1
you need to dry the remote control with a dry cloth immediately
when it gets wet.
2, when the battery hasn't been used for a long time we advise you to
remove it from the remote .be sure that children can't reach the
removed button cell .swallowing a of harm and is very dangerous
Remote control instruction
Remote panel instruction
POWER
MUTE
16 9/4 3 switch key
switch the display picture for 16 9 or4 3
Power
for turn the power on.
ute
open or close the volume
Number Buttons
selects TV channel directly
Image effect reset key
can set the image brightness,
soft colour or personality
quickly in turn