L-1 3100-1L User manual - page 18
Model 3100-1L Temperature Controller User Manual
15
Set Commands are:
set_user_IP_address
format = n.n.n.n (up to 3 numbers per n; example
=
10.0.1.13)
set_user_net_mask
format = n.n.n.n (up to 3 numbers per n; example
=
255.255.255.0)
set_user_name
up to 16 characters
set_save_user_data
1
=
save
Set Accepted? Light
Displays green if set command is accepted and red if set command is
rejected. The Get/Set toggle button must be toggled to Set for this
function to be available.
Parameters
Input parameters to be used with the set command that was chosen. The
Get/Set toggle must be toggled to Set for this function to be available.
Send Button
Sends the command (and any parameters if applicable) to the
temperature controller in the correct format.
Sent String
Displays the string that was sent to the temperature controller after the
send button was pressed.
Reply String
Displays the string the temperature controller sends back after receiving
a
command.
File Name
Name of the data file (data file is in text format; file extension .txt). An
example file name is 3100TC_MC_1311011459.txt where MC stands for
manual commands and the numeric code after the underscore character
indicates that the year was 2013, the month was November, the day was
01, and the time in 24 hour format was 14:59 when the file was created.
The file name is not displayed until it is created after the Send button is
pressed for the first time. The file name cannot be changed.