LA Fitness SA100 User Manual - Sa100 Assembly Instruction
STEP 1 : STABILIZER ASSEMBLY
1. Remove the plastic parts (used to protect the bottom of the frame during shipping). Lift the
bike frame (1), remove plastic parts and discard it.
2. Remove button head screws (18) and washers (19) from the front stabilizer bar (8) (with
transportation wheels). Set screws and washers aside. Lift front of bike. Place the front
stabilizer bar (8) under the frame (1). Line up the holes in the stabilizer bar with the holes in
the frame (1).
3. Secure the front stabilizer bar (8) to the frame using the button head screws (18) and
washers (19). Tighten the screws securely. (FIG.1)
4. Repeat process for rear stabilizer bar (9). (FIG.2)
1. While holding the seat post pulling-pin (4), slide the seat post
(3) into the seat tube. Release the pulling-pin (4).
2. Adjust the seat post to make sure the pulling-pin (4) is
engaged. Tight the seat post pulling-pin (4) securely.
Unscrew, pull out and hold the pulling-pin (4) of seat (3)
adjustment inner tube.
3. Slide the seat adjustment inner tube (2) all the way into the
seat tube. Release the pulling-pin (5) of seat adjustment
inner tube (2).
4. Adjust the seat adjustment inner tube (2) to make sure the
pulling-pin (5) is engaged. Tight the pulling-pin (5) of the seat
adjustment inner tube (2) securely.
3
SA100 ASSEMBLY INSTRUCTION
1
18
18
19
8
FIG.1
19
FIG.2
19
18
9
1
STEP 2 : SEAT ASSEMBLY
FIG.3
2
4
3
5