La Gard 3000 Installation Instructions Manual - page 9
(P/N)762.128RevBEN05/10•©copyright2009-2010
Kaba Mas LLC
page7
The 3710 Entry Device comes with the mylar portion of the keypad unattached.
1.Feedthekeypadcablethroughthespindlecableholefromthefrontofthesafedoor.(Figure5).
2.PositiontheEntryDeviceoverthescrewholesonthedoor,andliftthekeypadtoexposethe
mountingholes.
3.Installthetwo#8-32screws(US)ortheM4-0.7screws(metric)tomounttheEntryDeviceto
thedoor.
NOTE: Ensure that the battery connector is routed through the battery open at the bottom of the
housing, and no wires are pinched under the housing.
4.Removetheadhesivestripfromthebackofthekeypadandcarefullyalignbeforeadheringto
thehousing(Figure6).Priortoadhering,makesurethatthehousingiscompletelyfreeofdebris
suchasfilings,dust,etc.,forthebestpossiblecontact.
WARNING: Once installed, the Entry Device cannot be removed from the safe door without causing
physical damage to the keypad.
5.EnsurethattheEntryDevicecableisrunningthroughthechannelatthebackofthelock.Refertolock
installationinstructionswhichareavailableatwww.kaba-mas.com.
ALTERNATE INSTALLATION
Theoptionadapterplate(p/n3716)maybeusedtomountthe3710EntryDevicetoasafewith
verticalmountinghole(12and6o’clock).
1.Mounttheadapterplatecenteredonthethroughhole.Attachthedial
platewiththetwomountingscrewsUS8-32(US)ortheM4-0.7(metric).
Thenfollowtheaboveinstallationinstructions.
BATTERY INSTALLATION
1.Ifinstalled,removeblackplasticbatterycompartmentcover(locatedatthebottomofthekeypad)by
gentlypullingdownwardonitshandle.
2.Allowthebatteryconnectoranditsattachedleadstodropdownandoutofthebattery
compartment.Ifitdoesnotdrop,gentlypullonthebatteryconnectoruntilitdoes.
CAUTION! Hold onto battery terminal connector to avoid pulling the wires out of housing.
3.Connectanew9-Voltalkalinebatterytothebatteryconnector.
4.Pushthebatteryandtheleadscompletelyintothebatterycompartment.
5.Installthebatterycoverbyplacingonesideofthecoverinpositionandthenpressingthe
othersideintopositionwithyourfinger.
3716
Figure5
Figure6
3710
3710 ANGULAR ENTRY DEVICE (ADDITIONAL INSTRUCTIONS 3716 ADAPTER)