La spaziale s1 vivaldi ii timer instruction manual rev. A - 3/06/2007 notice: do not expose timer to heat or moisture.
Laspaziale s1 vivaldi ii timer instruction manual page 2 of 8 laspaziale vivaldi ii clock module general notes a) with the selection of english as the language, the time of the day is shown in standard hh:mm am/pm format on the first line. The date is show on the 2nd line in standard mm- dd-yy forma...
Laspaziale s1 vivaldi ii timer instruction manual page 3 of 8 1.1 timer programming pressing the button for about 3 sec. Enters the programming mode with the word “timer selectio” displayed. Use the buttons to select the desired mode then confirm with the button 1.2 “language selectio” mode confirm ...
Laspaziale s1 vivaldi ii timer instruction manual page 4 of 8 the following message is shown on the display: on the top line: day on the bottom line: 30 (flashing) with the buttons select the date of the week and confirm with . The following message is shown on the display: on the top line: year on ...
Laspaziale s1 vivaldi ii timer instruction manual page 5 of 8 off if you want to disable use of the timer function to turn the s1 on and off. On if you want to enable the timer to turn the s1 on and off at the programmed times, then confirm it with the button the display then changes to: on the top ...
Laspaziale s1 vivaldi ii timer instruction manual page 6 of 8 after selecting the last day of the week, you go back to the “timer selectio” display. Press to cycle back to the beginning of clock selectio mode or to exit programming mode. Special case settings: ! If the on and off time are both set t...
Laspaziale s1 vivaldi ii timer instruction manual page 7 of 8 press the button for about 3 sec. So as to copy the time setting of the previous day. Repeat the same operation for all days of the week. After selecting the last day of the week, the display returns to “timer selectio” mode. 2nd example:...
Laspaziale s1 vivaldi ii timer instruction manual page 8 of 8 set the following times all to 12:00am and confirm each setting with the button (tues 2º on, tues 2º off, tues 3º on, tues 3ºoff) until the display shows wednesday on the first line and copy on the second line. Press the button for 3 sec....
