La Spaziale S1 Vivaldi II Instruction Manual - page 6
LaSpaziale S1 Vivaldi II Timer Instruction Manual
Page 6 of 8
After selecting the last day of the week, you go back to the “Timer Selectio” display. Press
to cycle back to the beginning of Clock Selectio mode or to exit programming mode.
Special Case Settings:
!
If the ON and OFF time are both set to the same time, the machine remains off.
!
If the ON time of the next time setting is the same as the OFF time of the previous
setting, the machine stays on.
!
If there is one minute of difference (OFF 11:59pm - ON 12:00am) between the OFF time
of one specific day and the ON time of the following one, the machine stays on.
2. EXAMPLES OF TIMER PROGRAMMING
1st example:
In case you want to switch on the machine at 07:00am and switch it off at 09:00pm during the
whole week, proceed as follows:
Press for 3 sec. the button , confirm Timer Selectio mode with the button . Select
“TIMER ON” with the buttons , then confirm with .
The first line of the display shows Monday, confirm with the button .
Set with the buttons 7:00am as time and confirm with the button . Set the minutes
as 00 and confirm with the button (for programming instructions see paragraph 1.4).
The display shows on the first line MON 1º OFF, set with the buttons 09:00 pm as
time and confirm with the button , then set the minutes 00 and confirm with the button
.
Set the following times all to 9:00PM and confirming each with the button (Mon 2º ON,
Mon 2º OFF, Mon 3º ON, Mon 3º OFF) until the display shows Tuesday on the first line and
COPY on the second line.
Press button for 3 sec. so as to copy the time setting of the previous day. The display
shows Wednesday on the first line and COPY on the second line.