Labgear HDSR300 User Manual - page 12

11

z

  Rename 

Press UP or DOWN button to select one satellite,   

press RED button to enter “Edit Satellite” menu, 

press numeric key to input the new name. 

z

  Add 

Press GREEN button to add new satellite.   

z

  Delete 

Press BLUE button to delete selected satellite. 

4.3 Antenne Setup 

From “Installation” menu, press OK button on 

the Antenna Setup, you will get this window.

Satellite: If you press OK in Satellite, the   

satellites list is displayed. Move the cursor to a   

satellite and press OK to select the satellite 

LNB Freq: Here you can change LNB Frequency. 

Default is set to ‘Universal (9750-10600). 

Transponder: To change the transponder. 

DiSEqC1.0: Default is Disable. You can select Port1~Port4. 

22K: Default is Auto. 

Polarity: You can change the Polarity. Default is 

Auto

4.4 Single Satellite Search 

In this menu, you can select one satellite and set 

FTA Only (Yes or No), Scan Channel (TV 

Channel, Radio, or TV+Radio), Network Search 

(Default), and Scan Mode (Auto or Preset) to 

search channels only on the select satellite. English language channels set to Astra 2, 

Eurobird 1. 

4.5 Multi Satellite Search 

In this menu, you can set FTA Only, Scan 

Channel and Scan Mode to search channels on 

multi-satellite.