Labgear HDSR300 User Manual - page 15

14

5.3  Display Setting 

You can set Brighness, Contrast and 

Saturation. 

5.4  Local Time Setting  

you can set your STB’s time. This function is 

useful for EPG and some timer functions. 

If a broadcaster provides GMT signal, you can set 

the time using GMT or set your own time by 

yourself.  

If the “GMT usage” is set to “Off”, you can only 

set Date and Time.  

If you set “GMT Usage” to “On”, you can select   

“GMT Offset” and set “Summer Time” to “On” or “Off”. 

5.5  Timer Setting  

You can set the timer to make the receiver perform designated actions including timer 

based wake up or sleep instructions to the set-top-box. 

Use the UP/DOWN buttons to select timer. Press the OK button to enter your 

selected timer settings. 

You can set it as follow: 

Timer Mode: To select the timer mode, Once, 

Daily or Off. 

Timer Service: To select timer service, Channel or 

Record. 

Wakeup Channel: To select the wakeup channel 

of the timer action. 

Wakeup Date: To set the date of the timer action. 

On Time: To set the time of the timer action. 

Duration: To set the duration time.