Labgear S601a User manual - page 10
S601a - Auto Scan / TP Manager
10
• S/Q: Press the Orange key to enlarge signal strength and
quality readings.
• Constellation: Press the Blue key to view the satellite
constellation.
8.4 Spectrum
• Satellite-Spectrum
• Terrestrial-Spectrum
• Cable-Spectrum
8.4.1 Satellte Spectrum
Use the t u keys to change Center Frequency; Press OK to
enter Spectrum press the Red key to change bandwidth;
Press the Green key to change Vertical/Horizontal polarization;
Press Orange key to switch 22K on or off; Press Blue key to
change mode: Show IF/RF; Use function keys to navigate
spectrum: F1 Back TP, F2 Forward TP, F3 TP Find, F4 Service Find.
8.4.2 Terrestrial Spectrum
Use the t u keys to scan through the spectrum for information.
• Full/Ch: Press Red key to look at all the frequency points on
the terrestrial band or look at individual channels.
• Zoom: Press the Green key to zoom in to the frequency
selected, press again to zoom out.
• Locked: Press the Orange key to lock all the current frequency points, and remain unchanged
points you have so far scanned, press the Orange key again
to unlock.
• Scan: When the frequency points have been locked, you can
press the Blue key to scan the signals of the selected points.
8.4.3 Cable TV Spectrum
Can be viewed in the same way as the terrestrial TV spectrum.