LaCie USB Key MAX User Manual - . Troubleshooting
user manual |
In the event that your LaCie USB Key is not work-
ing correctly, please refer to the following checklist to
find out where the problem is coming from. If you have
gone through all of the points on the checklist and your
drive is still not working correctly, please have a look at
the FAQs that are regularly published on our website –
www.lacie.com
.
One of these FAQs may provide an answer to your
specific question. You can also visit the drivers pages,
where the most recent software updates will be avail-
able. If you need further assistance, please contact your
LaCie reseller or LaCie Technical Support (see page 21,
Contacting Customer Support
for details).
Manual Updates
LaCie is constantly striving to give you the most
up-to-date, comprehensive User Manuals available on
the market. It is our goal to provide you with a friendly,
easy-to-use format that will help you quickly install and
utilize the many functions of your new device.
If your manual does not reflect the configurations of
the product that you purchased, please check our web-
site for the most current version available.
■
. Troubleshooting
Problem
Question
Answer
The drive is not recog-
nized by the computer.
Does an icon for the drive appear
on the desktop?
There should be an icon for the LaCie drive on the desktop. If the
drive does not appear, follow the rest of the Troubleshooting tips to
isolate the problem.
Does your computer’s configuration
meet the minimum system require-
ments for use with this drive?
Check page 6,
Minimum System Requirements
for more informa-
tion.
Did you follow the correct installa-
tion steps for the specific interface
and operating system?
Review the installation steps on page 9,
Connect the Integrated
USB 2.0 Interface Cable
.
Is the integrated USB firmly con-
nected to your computer, or are both
ends of the USB extension cable
firmly attached?
Check both ends of the USB cables and make sure that they are
fully seated in their respective ports. Try disconnecting the cables,
waiting 10 seconds, and then reconnecting them. If the drive is still
not recognized, restart your computer and try again.
.. Mac Users
Troubleshooting