Lance ADX-2400M Installation And Operation Manual - page 17
17
IFB A1 = Madi Input 1 [IFB In 1]
IFB A2 = Madi Input 2 [IFB In 2]
IFB B1 = Madi Input 3 [IFB In 3]
IFB B2 = Madi Input 4 [IFB In 4]
IFB C1 = Madi Input 5 [IFB In 5]
IFB C2 = Madi Input 6 [IFB In 6]
IFB D1 = Madi Input 7 [IFB In 7]
IFB D2 = Madi Input 8 [IFB In 8]
PGM A1 = Madi Input 9 [PGM In 1]
PGM A2 = Madi Input 10 [PGM In 2]
PGM B1 = Madi Input 11 [PGM In 3]
PGM B2 = Madi Input 12 [PGM In 4]
PGM C1 = Madi Input 13 [PGM In 5]
PGM C2 = Madi Input 14 [PGM In 6]
PGM D1 = Madi Input 15 [PGM In 7]
PGM D2 = Madi Input 16 [PGM In 8]
PL A1 = 4-Wire Port 1 [Madi Input/Output 17]
PL A2 = 4-Wire Port 2 [Madi Input/Output 18]
PL B1 = 4-Wire Port 3 [Madi Input/Output 19]
PL B2 = 4-Wire Port 4 [Madi Input/Output 20]
PL C1 = 4-Wire Port 5 [Madi Input/Output 21]
PL C2 = 4-Wire Port 6 [Madi Input/Output 22]
PL D1 = 4-Wire Port 7 [Madi Input/Output 23]
PL D2 = 4-Wire Port 8 [Madi Input/Output 24]
All Levels set to Unity [0.00 dB]
Please see the detailed Configuration section of this manual for more information.
The following items are STATUS items, and are only to display status
information. They may not be directly changed by the user.
Status Item 01 – Unit A RX Status (Active or Idle)
Displays ACTIVE status if data is being received by network receiver 1. This
receiver is used for audio signals coming from the remote device assigned as A.
Status Item 02 – Unit B RX Status (Active or Idle)
Same for receiver 2, audio signals coming from the Unit B remote device.
Status Item 03 – Unit C RX Status (Active or Idle)
Same for receiver 3, audio signals coming from the Unit C remote device.
Status Item 04 – Unit D RX Status (Active or Idle)
Same for receiver 4, audio signals coming from the Unit D remote device.