Lancia Ypsilon Owner's Handbook Manual - page 12
11
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
OPERATION
Each time the car is started turning
the ignition key to MAR, the Lancia
CODE system control unit sends a
recognition code to the engine control
unit to deactivate the inhibitor.
The code is sent only if the Lancia
CODE system control unit has recog-
nised the code transmitted from the
key.
Each time the ignition key is turned
to the STOP position, the Lancia
CODE system deactivates the func-
tions of the engine electronic control
unit.
At starting, if the code has not been
recognised correctly, the warning light
Y
will come on.
In this case, the key should be moved
to the STOP position and then back
to MAR; if the lock continues, possi-
bly try again with the other key pro-
vided with the car. If it is still not pos-
sible to start the car apply to Lancia
Dealership.
IMPORTANT Every key has its own
code, which must be memorised by
the system control unit. To memorise
new keys, up to a maximum of eight,
apply to Lancia Dealership.
Warning light
Y
coming
on when driving
❒ If the warning light
Y
lights up,
this means that the system is run-
ning a self-test (e.g. due to a volt-
age drop).
❒ If the warning light
Y
stays on
apply to Lancia Dealership.
001-034 Ypsilon GB 10-10-2008 10:17 Pagina 11