Lancia Ypsilon Owner's Handbook Manual - page 54
53
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
AUTO buttons
(automatic operation) H-N
Pressing the AUTO button (on driver
and/or front passenger side) the sys-
tem automatically adjusts the amount
and distribution of the air admitted to
the passenger compartment, can-
celling all the previous manual ad-
justments.
This condition is indicated by the
message FULL AUTO on the front
system display.
Manual operation of at least one au-
tomatic function (air recirculation, air
distribution, fan speed or climate con-
trol compressor off) will cause FULL
message going off the display. This
means that automatic control is not
complete (except temperature control
which is always automatic).
IMPORTANT Should the system (af-
ter manual settings) be no longer able
to guarantee the required temperature
set in the passenger compartment, the
set temperature value will start flash-
ing to indicate this condition, after
one minute the AUTO message will
turn off.
To restore automatic system control
after one or more manual selections,
press button AUTO.
MONO button (alignment
of set temperatures and air
distribution) A
Pressing button MONO automatically
aligns the temperature on the front
passenger’s side with that on the dri-
ver’s side. It is therefore possible to set
the same temperature and air distri-
bution between the two zones simply
turning the knob on the driver’s side.
This function is provided to simplify
temperature adjustment of the whole
passenger compartment when only
the driver is on board. Separate oper-
ation of the set temperatures and air
distribution is automatically restored
by turning knob H or N or pressing
button MONO again when the button
led is on.
035-076 Ypsilon GB 10-10-2008 10:18 Pagina 53