Laney Nexus User Manual - Power Cord When Not In Use
15
Mixer Desk
or
Powered Cab
So what else can I connect?......
DI
: This connector is a balanced direct feed primarily go to a PA sound desk.
It carries a ground lift switch adjacent to it to remove any hum loop
problems. There is a source switch allowing the DI output to be sent “PRE”
from before any control functions on the amplifier or “POST” from after the
EQ and FX but before the Volume control and “Output” which is post the
Volume and all other control functions. This gives the option to send all of
the sound including output stage dynamics directly to the mix, avoiding the
need for microphones.
Tip: To allow suitable levels to be sent to the
desk there is an associated send Level
control.
Remote
: A 5pin DIN connector is provided for
connecting the Laney FS4-NSL footswitch.
The functions controlled are Mute, Pre-shape,
Interval and Space.
Footswitch
Always switch off and disconnect