Laney Nexus User Manual - page 17

16

Tuner

FX Unit

Headphones

Phones

:  Stereo jack is provided which can be used for headphones 

or a stereo feed to a PA system. There is a source switch which can 

be set to listen to the full amplifier or the stereo return from the 

USB.  A level control is included for comfortable listening.

Tip: Ensure the level is turned down before using to avoid 

unexpected excessive volume levels.

FX Loop: 

 This is an insert type loop so all of the signal is 

passed to the external processor. The mixing of the dry and 

effect signal must be controlled in your external processor.

A switch is provided to allow two nominal levels of loop 

signal and a bypass option.

Tip: The internal FX operate prior to the external 

FX loop.

Tuner/ RAW: 

 The output jack sends an 

untreated/dry signal to a tuner or DAW system.

This output is unaffected by the Mute or Standby 

functions.

Phones, FX procesor or Tuner....