Lang 36S-20M-U Installation, Operation, Maintenance, & Troubleshooting - Maintenance & Cleaning
14
MAINTENANCE & CLEANING
NOTICE
Service on this, or any other, LANG appliance must be performed by
qualified personnel only. Consult your authorized service station
directory or call the factory at 1-800-224-LANG (5264), or
WWW.LANGWORLD.COM For the service station nearest you.
WARNING
BOTH HIGH AND LOW VOLTAGES ARE PRESENT INSIDE THIS
APPLIANCE WHEN THE UNIT IS PLUGGED/WIRED INTO A LIVE
RECEPTACLE. BEFORE REPLACING ANY PARTS, DISCONNECT THE
UNIT FROM THE ELECTRIC POWER SUPPLY.
CAUTION
USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY
LANG OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE BODILY
INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND
WILL VOID ALL WARRANTIES.
TROUBLE SHOOTING
OVEN
O
VEN
W
ILL
N
OT
H
EAT
PROBABLE CAUSE
CORRECTIVE ACTION
Oven circuit breaker not on
Cycle breaker to the “ON” position.
Incorrect wiring
Confirm that oven is getting proper voltage.
Confirm that range is phased correctly.
Defective Thermostat
Confirm that thermostat is getting correct voltage.
Confirm that thermostat is operating properly.
Defective 3-Heat Switch
Confirm that 3-heat switch is getting correct voltage.
Confirm that 3-heat switch is operating properly.
Defective Element
Confirm that element is getting correct voltage
Check element for normal operation. (3.75 amps on the outside element
and 2.5 amps on the inside element)
O
VEN
G
ETTING
T
OO
H
OT OR
N
OT
H
OT
E
NOUGH
PROBABLE CAUSE
CORRECTIVE ACTION
Defective Thermostat
Confirm that thermostat is getting correct voltage.
Confirm that thermostat is operating properly.
Thermostat out of Calibration Confirm that oven is getting to correct temperature
Calibrate oven (See instructions below).