Laser AS 50 Instructions For Use Manual - page 13
AS 50
V. 1.2, 26.11.2009
13
9.
Charging the battery
In order to charge the batteries attach the plug of the Ansmann ACS 110 Traveller
into the socket on the devices. Shut off the device with the O/I switch.
10.
Charging the battery
The display will indicate the condition of the battery. If it is on low the battery shall be
charged. For charging insert the plug of the charger into the socket on the back side of the
AS 50
and connect it with the mains supply.
The batteries can be charged at any time because they do not have a memory effect.
LED indicators on the charger
Power (mains
current)
red
continuous
Charge is connected to the mains supply
Charge red
continuous
Accumulators will be charged
Ready green
flashing
Charging still in progress
Ready
green
continuous
Accumulators are fully charged
Battery compartment
Socket for charging