Laser AS 50 Instructions For Use Manual - page 16
AS 50
V. 1.2, 26.11.2009
16
11.3. Maintenance/Calibration
The laser diodes will be calibrated by the software at each start. RJ recommends an annual
service of the laser at the RJ service facilities or an authorized service station.
Always ensure that operational and sufficiently charged batteries are used.
The interior of the AS 50 contains no elements or components which require servicing by
the user.
Therefore, there is no need to open the housing. To meet the requirements of DIN VDE
0837, “Radiation safety for laser devices,” the unit is to be tested and recalibrate after one
year of use to ensure that the laser is operating properly. Please send the unit to the
manufacturer for testing and recalibration.
The producer will supply spare parts up to 10 years after delivery date.
11.4. Disposal
Due to the hazards of laser beams, the AS 50is not to be disposed of as standard
electronic scrap. The device is to be delivered to either the supplier or to the manufacturer for
proper disposal.
11.5. Warranty
There is a 2 years warranty from the manufacturer. The manufacturer guarantees operation
of all AS 50features described in the user’s guide, provided the equipment is used in
accordance with the instructions detailed in the user’s guide and is treated with proper care.
New settings, maintenance or repairs may only be performed by the manufacturer or an
authorized workshop; otherwise the warranty is rendered null and void. Interventions in the
device by third parties will lead to loss of warranty claims and will release the manufacturer
from all product liability.