Laser Interceptor Laser Interceptor User Manual - Warnings:
Warnings:
- Please take special care while installing sensors. We recommend installation in
equipped and experienced workshop. Damaging cable may result in faulty operation.
DO NOT CUT AND CRIMP new connectors if you don't know exactly what are you
doing, opposite crimped connector may lead to permanent unit damage witch is
NOT covered under warranty.
•Since this device uses IR light it can not be used as relied parking aid since some
materials absorbs or do not reflect infrared light. When using parking aid rely on
personal judgment. Black or transparent obstacles will not be detected.
•Use of Laser products can be regulated by your local laws. Please advise should this
device be used in your area or NOT.
•DO NOT plug any third party equipment in to any plugs on CPU. DO NOT try to
connect outer sensors on third party devices.
•When driving on longer distances periodically check for accumulated dirt or snow
on outer sensors and use cotton wipe to clean lenses on outer sensors
M
aintenance:
B
asically unit is maintenance free, but you should check periodically that lenses on
outer sensors are clean, you can clean them with any water based or alcohol means
or using a simple wipe.
This device is class 1M laser product.
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
(MAGNIFIERS) TO SENSOR HEADS WHILE ON !!
LI sensors emits an invisible laser light (905nm) that can be harmful to sight.
NEVER, under any circumstances look at the sensors while it is connected to a
power supply.
Service and support:
If you having any doubts if your device is functioning properly please contact us at:
www.laserinterceptor.info
Register your Laser Interceptor
Please take some time and register your product (serial number required) online at
www.laserinterceptor.info It is free and you will be entitled for 2 years extended
warranty and support for new firmware versions.
USER MANUAL
6