Laser Link Golf XL1000 Instruction Manual And Warranty Information - Measurement Modes
The rangefinder will continue to measure (and the box will continue to flash) for as long
as you hold down the Power button. You will see the yardage change as you change
targets. If you are in AccuFLAG Mode, your yardage will change only when a shorter
distance is measured. See MEASUREMENT MODES to learn more.
4. Your distance will appear at the top of the internal LCD.
MEASUREMENT MODES
Scan Mode – XL1000 is programmed to provide the user the ability to get multiple
measurements with one press of the Power button. To use Scan Mode:
1. Press and release the Power button to turn the rangefinder on. Then, simply PRESS
AND HOLD the Power button and slowly sweep the rangefinder across your intended
targets. You will see the laser indicator box ( ) continue to flash, and you will see
multiple readings appearing on the LCD as you move the rangefinder.
2. Release the Power button. The distance displayed will be the final measurement taken
by the rangefinder before you removed your finger from the Power button.
AccuFLAG Mode – AccuFLAG Mode is specially programmed to help determine the
distance to the flagstick. AccuFLAG gathers and analyzes measurement data to determine
the distance to the closest target, which is usually the flagstick. When AccuFLAG Mode is
activated, a golf flag graphic will appear on the left-hand side of the LCD.