Laser Link Golf XL1000 Instruction Manual And Warranty Information - Troubleshooting
TROUBLESHOOTING
Issues that you encounter with any of our Laser Link rangefinders are often easily solved
without returning the unit to Laser Link Golf. In many cases, the remedy can be as simple as
changing the battery, and we recommend that this be done prior to returning the product to
the company.
The rangefinder is reading an incorrect yardage.
•
Check to see if the low battery indicator ( ) is present on the LCD screen. The lack of
adequate power can cause yardage measurements to be compromised. If the indicator is
present, change the battery.
•
The rangefinder is capable of reading measurements in both yards and meters. Occasionally,
the user will accidentally change the measurement setting, causing him/her to believe the
product is measuring incorrect distance. You can determine if the product is measuring in
yards or meters by pressing that Power button and noticing if a Y or an M appears on the
screen. Instructions on how to change the setting are included in this manual.
The rangefinder gets a reading only some of the time.
•
Make sure that nothing is blocking the sending or receiving lenses of the rangefinder,
such as your finger. Keep in mind – firing through the windshield of the cart may prevent
consistent and accurate readings.
•
In many cases, a slight change in user behavior will make the unit perform perfectly, and
using the OPERATING INSTRUCTIONS procedure outlined earlier will often solve the problem.
If you continue to have difficulties getting readings, please contact Laser Link Golf for help.