Laser Link Golf XL1000 Instruction Manual And Warranty Information - To Activate:
To activate:
1. Press and release the Power button once to turn on the rangefinder.
Then, press and release the Mode button until you see the flagstick
graphic appear on the left-hand side of the LCD. When this flagstick
is present, AccuFLAG Mode is activated.
To use AccuFLAG Mode:
1. Press and hold the Power button to activate Scan Mode. With Scan Mode activated,
move the rangefinder slowly across the flagstick and surrounding background targets.
You will see various distance measurements appear on the LCD.
2. Release the Power button. The shortest distance measured will remain on the LCD.
Unit of Measurement – XL1000 measures in yards or meters. To change the unit of
measurement:
1. Press and release the Power button to turn the rangefinder on. The unit of measurement
indicator is located in the upper right-hand part of the LCD, directly next to the distance
readout. “Y” indicates yards, “M” indicates meters.
2. Press and hold the Mode button. The unit of measurement indicator will change.