Laser SPK-WFQ10 Quick User Manual - Button Description
QUICK USER MANUAL SPK-WFQ10
2
-
Decrease
volume
SET ( RESET/ WPS
Mode): Press
briefly to activate
WPS mode; press
and hold for about
5 seconds to
restore the speaker
to factory settings.
DC IN : Socket for
mains power
adapter. Connect
the power
adapter to power
on the system
automatically.
LINE-IN: Audio
input, 3.5mm
socket.
PLEASE USE
THE CABLE
SUPPLIED FOR
BEST SOUND
BUTTON DESCRIPTION
TOP
BACK
CONNECTING TO POWER
Connect your Wi-Fi speaker to a mains power outlet using the supplied external power supply. This
speaker has no ON OFF switch so it will turn on automatically. Note: Disconnect the power, to turn the
speaker OFF.
STANDBY MODE
The system will enter Standby mode after 15 minutes without any audio signal input.
To exit out of Standby mode, begin playing music from your Phone App or, press the volume UP or DOWN
buttons.
LED DISPLAY
Status
Display
Status
STANDBY
Fade in and Out
RED
Standby mode after 15 minutes without any audio signal inputs.
VOL- / +
Flashes
Volume increase/ decrease
LINE-IN
Lights up
Orange
Connected via LINE IN (Auxiliary input)
WI-FI
Flashes White
Booting process / Establishing Wi-Fi connection (via WPS mode)
Lights up White
System ready for Wi-Fi connection (AP Mode)
SET
Flashes
Green
Reset to Factory default / Firmware updated
MUTE
Flashes Slowly
Mute audio
Mute
+
Increase
volume