Laser SPK-WFQ10 Quick User Manual - page 8
QUICK USER MANUAL SPK-WFQ10
7
2) Connecting your speaker to a Wi-Fi network
After pressing connect in the previous screen you will then be automatically redirected to the following
log in page where you will be prompted to give your speaker a nick name. You will also need to select your
Wi-Fi network name from the drop down list and to enter your Wi-Fi password.
The speaker is now connected to your network.
The device will automatically disconnect you from the
speaker and reconnect you with your previous network connection (if you were connected).
Please Note: If your network router does not assign an IP address automatically, switch the DHCP function
to OFF and then enter the IP address manually. Then enter the network key again if required, and click
“CONNECT”.
Please Note: The speaker saves the connection, so you do not need to setup the connection next time it is
switched on. It will connect automatically.