LaserShield Instant Security System Quick Start Manual - page 3
TEST SYSTEM
ACTIVATE MONITORING AND RESPONSE
EXIT LEARN MODE
4
5
6
• Press Learn button on rear of MAU or wait 60 seconds
• MAU will announce all learned devices
NOTE: Be certain all devices are acknowledged by the MAU.
• Press a Panic button
• Allow siren to ring for 10 seconds
• Disarm system with Keychain Remote and wait
for a phone call from LaserShield
®
• Prepare to enter your Passcode using telephone
touch pad to complete the Activation process.
NOTE: Your Passcode is located on the Emergency Wallet Cards
included with your LaserShield
®
System.
Press Button to Disarm
Press Panic Button to Test
Press Button to Exit
Learn Mode
NOTE: You may use the alarm without response while waiting for Monitoring Service
Activation. Internet registration is immediate. Notification and response is an important
precaution against walking in on an intruder.
• Go to www.lasershield.net
• Click on "Activate" LaserShield
®
• Prepare to enter your Device ID
Number located on bottom of MAU
• Follow instructions
NON-INTERNET USERS
• Fax or mail Activation Forms (included in box) to LaserShield
®
Customer Care
• Wait for LaserShield
®
Customer Care to contact you to request you to test the system
and confirm activation
You are not fully protected until you activate monitoring
w w w . l a s e r s h i e l d . n e t
24/7 Monitorin
g
Professional Response
Immediate Notification