LaserShield Instant Security System Quick Start Manual - page 4
CONTACT INFORMATION
ARMING AT NIGHT
ARMING AND DISARMING
7
8
NOTE: When returning, the alarm will beep will beep 20 seconds to remind you to Disarm
NOTE: Remember to press Bypass button to reactivate unit before leaving.
MAU will always announce any bypassed unit during arming.
Wireless Detection Unit Panic buttons still work during Bypass mode.
• If you have a Wireless Detection Unit for your bedroom,
press the Bypass button
• Arm your system
• System will ask you to press Arm a second time during
Bypass arming
Please contact LaserShield
®
Customer Care at 1-866-618-4336 if you have any
questions.
LaserShield
®
Security Systems, Inc.
LaserShield Customer Care,
c/o Accent,
645 Park East Boulevard,
New Albany, IN 47150
Visit us on the Internet:
www.lasershield.net
© 2003 LaserShield
®
Systems, Inc. All Rights Reserved.
Press Button to Arm
Press Button to Disarm
Press Button to Bypass
• Before leaving, press Arm button on your Keychain Remote
• Exit within 60 seconds
• When returning, press Disarm on Keychain Remote