1. DL manuals
  2. Lawmate
  3. DVR
  4. PV-1000 Touch
  5. User Manual

Lawmate PV-1000 Touch User Manual - 33    Create Logs

Other manuals for PV-1000 Touch: User Manual, User Manual

Summary of PV-1000 Touch

  • Page 1

    User manual pv-1000touch user manual pv-1000touch lawmate, innovation never stops!.

  • Page 2

    1. Power button 2. Stop/rec button 3. Screen lock 4. Hdmi out 5. Control port 6. Digital cam in 7. Analog cam in 8. Camera led 9. A/v in 10. A/v out 11. Infrared sensor 12. Reset button 13. Battery compartment 14. 5” touch screen 15. Memory card slot 16. Speaker 17. Dc in 18. Usb port 19. Led status...

  • Page 3

    2. Package content european standard adapter head usb cable infrared remote controller a/v in cable earphone a/v out cable 3 dc5v 3a charger pouch stylus pick battery pack 3.7v li-ion battery pack capacity 4400 mah ba-4400slim caution.. Do not crush, puncture, incinerable or short external contact c...

  • Page 4

    3. Basic operation power on: press power on / off button on the unit to turn on the device. Power off: press power on / off button on the unit to turn off the device. When the device is turned on, it enters main menu page. Touch the screen to select the desired function. A. Power on / off device b. ...

  • Page 5

    3. Basic operation 2 d. Output to monitor e. Connect to pc 1. Touch settings on the main menu, enter “display” and choose “tv” as input end. 2. Plug the rca cable into av-out port and connect the other end to the monitor to output the image. F. Charging 1. Connect two ends of the usb cable to pc and...

  • Page 6

    4. Operation- recording 1. Connect a 5v analogue camera to cam in port or a lawmate digital camera to digital cam in port 2. Power on the device by pressing . 3. To start recording, switch to rec. 4. Touch on the screen to start recording and switch to stop power stop rec lock hdmi-tv control 1 2 3 ...

  • Page 7: 1.  Preview

    1 5. Introduction to all setting functions enter settings page 1. Preview select your preferable preview mode among the sections.  resolution ( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 1280x960 )  quality(high/normal/low)  frame rate( 1 / 5/ 15 /20/30)  audio (enable/disable)  frame ...

  • Page 8: 2.  Pre-Event

    2 2. Pre-event features as soon as the record function is triggered, the video automatically traces back 5 seconds or 15 seconds before the record button is pressed. Note: this function is activated after 15 seconds of recording.  resolution ( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 128...

  • Page 9: 3.  Pre-Motion

    3 3. Pre-motion features as soon as a movement is derected, recording starts. The video automatically traces back 5 or 15 seconds before the record button is pressed. Note: this function is activated after 15 seconds of recording.  resolution ( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 12...

  • Page 10: 4.  Motion Detection

    4 4. Motion detection  resolution ( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 1280x960 )  quality(high/normal/low)  frame rate ( 1 / 5/ 15 /20/30)  audio (enable/ unable)  frame counter stamp (on/off)  timestamp (on/off)  device id stamp (on/off)  motion detect level (high / medium...

  • Page 11: 5.  Date And Time Setting

    5 5. Date and time setting select the correct year/month/date/hour/minute to set up date and time information 6. Date format select date format between yyyymmdd / ddmmyyyy 7. Language select the language among english /simplified chinese/ traditional chinese/japanese/ french /russian  english/簡体中文/...

  • Page 12: 7  Recording Mode

    6 7 recording mode set up desired recording mode from the sections. 8 resume to pre-set duration activate the recording after 15 sec/30 sec according to your selected recording mode. You could either switch the function off by selecting no..

  • Page 13: 9  Timer Recording

    7 9 timer recording this function serves to activate/deactivate the recording regarding the preset date and time information. Dvr must be powered off before the recording is started up. 1. Enter the file to edit timer recording settings 2. Video line in rec start set up your recording schdules. Ente...

  • Page 14: 10  Daily Timer

    8 10 daily timer preset your daily recording schedule by inserting time information. Enter recurrent to set days..

  • Page 15: 11  Backlight Out Duration

    9 11 backlight out duration set up back up duration 30 sec / 1min / 3min or choose “no” to turn it off 12 digital cam low lux turn on/off the low lux function of the digital camera 13 digital cam ntsc/pal set up ntsc/pal system.

  • Page 16: 14  Storage Option

    10 14 storage option touch the screen to choose hdd or sd for storage. . 15 storage information click in to view the storage information. 16 storage capacity icon turn on the storage capacity icon to display storage.

  • Page 17: 17  Format Memory

    11 17 format memory choose to format hard disk or sd card 18 tv out setting choose tv out video system ntsc or pal 19 tv out adjustment adjust tvout screen position..

  • Page 18: 20  Display

    12 20 display touch the screen to choose the lcd/tv/hdmi for the display option. 21 video playback touch the screen to choose playback mode ( repeat all / all / one / repeat one) 22 video thumbnail set up to enable video image preview on the playback list..

  • Page 19: 23    Image Thumbnail

    13 23 image thumbnail set up to enable snapshot image preview on the playlist. 24 start slideshow set up if enable slideshow 25 slideshow duration set up slideshow duration amont 3 / 5 / 7 / 10 seconds..

  • Page 20: 26  Firmware Upgrade

    14 26 firmware upgrade save the upgrade firmware file onto memory card and touch “firmware upgrade” button. After the system is updated, it will reboot automatically. If the message “update error” is shown, it means the upgrade is failed due to incomplete file or damaged memory card. Please use othe...

  • Page 21: 28  Power On Password

    15 28 power on password select on to activate pv-1000touch password protection. Enter password each time you turn on pv-1000touch. 29 set power on password enter the password 30 usb connection password select on to activate usb connection password. Each time you connect pv-1000touch to equipment by ...

  • Page 22: 33    Create Logs

    16 32 touch panel calibration touch the screen for the calibration. 33 create logs record all log times for power on/off, usb plug-in/out and record and playback. Touch the screen to choose the off/on. 34 view log touch the view log on the screen to show log record..

  • Page 23: 35  Save All Logs

    17 35 save all logs touch the screen to choose if save the logs to hdd or sd. 36 device information show information about pv-1000touch.

  • Page 24: 6. Video Playback

    18 6. Video playback  operations on main menu select “video” on the main menu to enter playback list. Touch the esc on the screen to stop playing and return to the last page  fast playback  double speed playback: touch during normal playback, the video file will be played with a speed two times q...

  • Page 25

    19 4 times speed playback: touch twice on the screen during normal playback ,the video file will be played with a speed four times quicker; touch resume to the normal playback speed. X 2 > and press to normal speed playing 8 times speed playback:touch three times during normal playback or, the video...

  • Page 26

    20  1/4 times speed playback: touch twice after pausing the playback, the video file will be played in 1/4 slow motion; touch to resume the normal playback speed. On the remote control, you can press > x 2 >  1/8 times speed playback: press three times after pausing the playback, the video file wi...

  • Page 27

    21 screen to resume the normal playback speed. X 1 > on the remote control  four times reverse playback: touch twice during normal playing, the video file will be played with a speed four times quicker; touch on the screen to resume the normal playback speed. X 2 > on the remote control  eight tim...

  • Page 28

    22  stop > touch on the screen to stop playing and turn to file list mode. Or press on the remote control.  video capture > capture image while the video is playing touch on the screen or press on the remote control to stop playing, and touch on the screen for a snapshot. The captured pictures wil...

  • Page 29: 7. Video Editing

    23 7. Video editing  during video playback > touch on the screen or press on the remote control, the video will be paused, and the setting items will appear :  video playback (repeat all/all/one/repeat one)  full screen (on/off)  display (lcd/tv/both)  in file list mode > touch on the screen or...

  • Page 30: 8.Photo Browsing

    24  move (one/all)  file information  in upper layer of the file list > touch on the screen or press on the remote control, the setting items will appear :  video playback (repeat all//all/one/repeat one)  video thumbnail (on/off)  delete directory (one/all) 8.Photo browsing  operations on th...

  • Page 31

    25 on the main menu, touch image on the screen entering to the newest file , touch the file name on the screen to browse the selected photo. After browsing the photo, touch on the screen to the upper level of the file, touch on the screen entering to the latest photo file, touch once again to myreco...

  • Page 32: 9.Photo Editing Mode

    26  zoom in by 4 times: press press on the remote control twice (image is enlarged ，press to move; press once again ，to normal size )  slide show in file list mode or image browsing mode, touch to select “start slide show” or press on the remote control to start the slide show. Touch the screen or...

  • Page 33

    27 items appear:  start slideshow  image thumbnail ( on/off)  delete (on/off)  deletion lock(on/off)  copy(one/all)  move (one/all)  playback slideshow(all/no)  slideshow duration (3/5/7/10 sec)  file information  during photo browsing:.

  • Page 34

    28 touch on the screen or press on the remote control, the setting items appear:  start slideshow  playback slideshow (all/no)  slide show duration (3 sec/ 5 sec/ 7 sec/10 sec)  file information touch on the screen or press to return the upper level.  in the file list mode : touch on the screen...

  • Page 35: 10 File Format

    29  slide show duration (3 sec/ 5 sec/ 7 sec/10 sec)  delete directory 10 file format  file format baseline jpg lower than 4032 * 4032 11 record  connect a camera to the pv-1000touch touch record on the main menu，or press on the remote control to choose the function : preview/pre-event/pre-motio...

  • Page 36

    30 touch to start recording or press button on the remote control press button or the one on the remote controller to stop recording, and the screen will return to stand-by mode of preview to prepare for recording.  in preview mode, touch on the screen or press on the remote control, the setting it...

  • Page 37

    31  timestamp (on/off)  device id stamp (on/off)  microphone sensitivity  overwrite(disable (2) pre-event feature: as soon as the record function is triggered, the video automatically trace back 15 seconds before the record button is pressed.  touch pre-event to enter pre-event mode.  touch on...

  • Page 38

    32  frame counter stamp (on/off)  timestamp (on/off)  device id stamp (on/off)  pre-event duration (30 sec，15 sec)  microphone sensitivity  over-write (disable/enable) (3) pre-motion.

  • Page 39

    33  touch on the screen or press on remote control to start recording  touch on the screen or press on the remote control, the setting items appear:  resolution( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 1280x960 )  quality( 1 / 5/ 15 /20/30)  frame rate (30/  audio (enable/ unable) ...

  • Page 40

    34 touch on the screen or press on the remote control, the setting items appear: resolution ( 320x240 / 640x480 / 720x480 / 1024x768 / 1280x720 / 1280x960 ) quality(good/norma/ low) frame rate ( 1 / 5/ 15 /20/25) audio (enable/disable) frame counter stamp (on/off) timestamp (on/off) device id stamp ...

  • Page 41

    35  video capture > capture image while recording touch on the screen, the captured pictures will be stored in the image file..