LCI Tri-Fold Sofa Owner's And Service Manual - page 5
Rev: 05.23.2017
Page 5
Tri Fold Sofa Owners and Service Manual
Stationary Back Replacement Instructions
Full Stationary Back Assembly
1. Remove back cushions from sofa and set aside.
2. Unfold front seat and middle seat to expose
mounting bolts and nuts (Fig. 3).
3. Remove the 2 nuts and 2 bolts from each
mounting bracket and set aside (Fig. 4). Discard
back assembly.
4. Set new back assembly in place with holes in
mounting brackets aligned with holes in V2
frame.
5. Insert bolts through mounting bracket and V2
frame.
6. Secure bolts with nuts.
7. Fold front seat and middle into stored position.
8. Reattach back cushions.
NOte: To replace the stationary back interior foam,
stationary back interior frame or stationary
back cover, the stationary back asssembly
needs to be removed first for easier access.
Stationary Back Interior Foam
1. Unzip cover from the stationary back.
2. Remove and discard foam.
3. Place new foam on the interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Stationary Back Interior Frame
1. Unzip cover from the stationary back.
2. Remove and discard the old interior frame.
3. Place foam on the new interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Stationary Back Cover
1. Unzip cover from the stationary back.
2. Remove and discard the old cover.
3. Slip new cover over the interior frame and foam.
4. Zip cover completely.
Fig. 4
Fig. 3
Stationary Back
V2 Frame
Mounting Bracket