LCI Tri-Fold Sofa Owner's And Service Manual - page 6
Rev: 05.23.2017
Page 6
Tri Fold Sofa Owners and Service Manual
Couch Seat Replacement Instructions
Couch Seat Assembly
1. Remove cotter pins from the end of the clevis
pins (Fig. 5).
NOte: There is one clevis pin on each side of the Tri-
fold sofa at the bottom of the seat. The clevis
pins are attached to the steel tab connected to
the middle seat.
2. Push clevis pin through hole (Fig. 6) of the steel
tab with a screw driver.
3. Repeat on the other side. The couch seat will
detach from the middle seat.
NOte: The steel tab (Fig. 6) connects the couch seat
to the middle seat. The shorter end of the steel
tab goes to the V2 frame. The longer end of
the steel tab goes to the seat.
NOte: To replace the couch seat interior foam, couch
seat interior frame or couch seat cover, the
couch seat asssembly needs to be removed
first for easier access.
Couch Seat Interior Foam
1. Unzip cover from the couch seat (Fig. 7).
2. Remove and discard foam.
3. Place new foam on the interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Couch Seat Interior Frame
1. Unzip cover from the couch seat.
2. Remove and discard the old interior frame.
3. Place foam on the new interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Couch Seat Cover
1. Unzip cover from the couch seat.
2. Remove and discard the old cover.
3. Slip new cover over the interior frame and foam.
4. Zip cover completely.
Couch Seat Legs
1. Remove the legs by removing the (4) bolts and
nuts (Fig. 8) on either side.
2. Place new legs in the same position the old legs
were removed from and add bolts and nuts.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Cotter Pin
Clevis Pin
Steel tab
Bolt
Nut