LCI Tri-Fold Sofa Owner's And Service Manual - page 7
Rev: 05.23.2017
Page 7
Tri Fold Sofa Owners and Service Manual
Middle Seat Replacement Instructions
Middle Seat Assembly
1. Remove one side of V2 Frame first. Start by
removing 3 screws using a combo head square
drive (Fig. 9).
2. Remove cotter pin (Fig. 10).
3. Lift up, push clevis pin out from the steel tab
using a screw driver (Fig. 11).
4. Repeat 2-3 for the other side of the seat.
NOte: During replacement, make sure the pillow
side of the middle seat is up.
NOte: To replace the middle seat interior foam,
middle seat interior frame or middle seat
cover the middle seat asssembly needs to be
removed first for easier access.
Middle Seat Interior Foam
1. Unzip cover from the middle seat.
2. Remove and discard foam.
3. Place new foam on the interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Middle Seat Interior Frame
1. Unzip cover from the middle seat.
2. Remove and discard the old interior frame.
3. Place foam on the new interior frame.
4. Slip cover over the interior frame and foam.
5. Zip cover completely.
Middle Seat Cover
1. Unzip cover from the middle seat.
2. Remove and discard the old cover.
3. Slip new cover over the interior frame and foam.
4. Zip cover completely.
Fig. 9
Fig. 10
Fig. 11
Clevis Pin
V2 Frame
Cotter Pin