LD LDDSP45K User Manual - page 14
14
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
•••
PARAMETRIC SPEAKER EQUALIZER
72
73
72
74
75
76
75
77
78
79
81
82
83
85
84
86
87
78
80
FREQUENCY
72
– click the arrow icons to increase or decrease the frequency of the selected EQ bands in 1 Hz increments.
73
Virtual Fader – click and hold the virtual fader knob and drag it upwards to increase the frequency and downwards to lower it.
74
Display/input field – direct input via keyboard and display of the frequency in Hertz (Hz).
Q-FACTOR
75
– click the arrow icons to configure the Q-factor of the selected EQ bands from 0.2 to 20.
76
Virtual Fader – click and hold the virtual fader button and drag it up or down to select the desired Q-factor.
77
Display/input field – direct input via keyboard and display of the Q-factor.
GAIN
78
– click the arrow icons to increase or decrease the gain of the selected EQ bands in 0.1 dB increments.
79
Virtual Fader – click and hold the virtual fader button and drag it up or down to increase or decrease gain as desired.
80
Display/input field – direct input via keyboard and display of gain in dB.
81
FILTER NUMBER – use the arrow symbols to select and display the filter number of filters 1 to 16 (selected band is highlighted in white).
82
FILTER TYPE drop-down menu to select filter type in EQ bands 1 to 16.
83
FILTER ON – check or uncheck the box to activate or deactivate the selected filter (bypass).
84
Save – using this button, the filter settings of all 16 EQ bands can be saved in a file on the PC as an EQ-preset.
85
Open – load a previously saved EQ preset from the PC into the selected channel A to D.
86
CHANNEL A to D – select the desired channel for editing by clicking on the channel button.
87
EQ 1 to 16 – overview window for EQs 1 to 16. Use the computer mouse to activate or deactivate the desired EQ bands
(checkmark next to
ON = EQ band active, checkmark removed = EQ band deactivated).