LD LDESUB15AG3 User Manual - page 8
8
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SETUP
Thanks to the multifunctional cabinet, the subwoofers of the Stinger G3 Series can be placed both horizontally and vertically. Non-slip rub-
ber rails provide stability in both cases. To prevent slippage when stacking the subwoofers, recesses are located on the top for the rubber
rails. An M20 threaded flange when using a speaker extension tube is located on the top side of the cabinet.
LDESUB15AG3:
Protective Cover
Item No.: LDESUB15G3PC
Castor Board
Item No.: LDESUB15G3CB
LDESUB18AG3:
Protective Cover
Item No.: LDESUB18G3PC
Castor Board
Item No.: LDESUB18G3CB
OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
Model number:
LDESUB15AG3
LDESUB18AG3
Product type:
PA subwoofer
PA subwoofer
Type:
Active
Active
Low/mid driver dimensions:
15“
18“
Low/mid driver dimensions (mm):
381 mm
457.2 mm
Woofer magnet:
Ferrite
Ferrite
Woofer brand:
Custom-made
Custom-made
Woofer voice coil:
3“
4“
Woofer voice coil (mm):
76.5 mm
101.6 mm
Amplifier:
Class D
Class D
RMS:
450 W
800 W
Peak power:
900 W
1600 W
Frequency response:
40 - Low-pass
35 - Low-pass
Max. SPL (peak):
133 dB
135 dB
Protection circuits:
DC, over-current, short circuit, limiter
DC, over-current, short circuit, limiter
Input impedance:
30 kOhm
30 kOhm
Input sensitivity:
0.3 V (RMS)
0.3 V (RMS)
Controls:
Main level, mode
Main level, mode
Indicators:
On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
Line inputs:
2
2
Line input connectors:
6.3 mm jack, XLR
6.3 mm jack, XLR
Line outputs:
2
2
Line output connectors:
XLR
XLR
Operating voltage:
SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)
SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)