LD LDMAUI44 User Manual - page 30
30
Power Socket:
Neutrik PowerCon
Power Supply:
switching power supply
Operating Voltage:
100 V AC - 120 V AC, 50 - 60 Hz
200 V AC - 240 V AC, 50 - 60 Hz
Power Consumption (max.):
2000 VA
Stereo Line Inputs:
2
Line Input Connectors:
XLR / 6.3 mm jack combo, RCA
Stereo Line Outputs:
1
Line Output Connectors:
2 x XLR male
Subwoofer Line Output:
1 x XLR male
Speaker Outputs:
1
Speaker Output Connections:
custom made multi-pin
DSP Specifications
DSP Functions:
Limiter, EQ, Compressor, Crossover
Resolution A/D - D/A:
24 Bit - 24 Bit
Sampling Rate:
48 kHz
Noise Ratio:
100 dB
Model Name:
LDMAUI44SE
Product Type:
subwoofer expansion
Type:
active
Woofer Size:
2 x 12"
Woofer Size:
2 x 304.8 mm
Woofer Magnet:
neodymium
Woofer Brand:
custom made
Amplifier:
class D
Amplifier Power (RMS):
800 W
Max. SPL (continuous):
121 dB
Max. SPL (peak):
129 dB
Frequency Response:
40 Hz - 140 Hz
Protection:
multiband limiter, over voltage, short circuit, overcurrent
Cooling System:
passive
Controls:
Sub Level, Sub Freq, Sub Phase, Power ON / OFF, DSP Mode
Indicators:
LEDs for: On, Signal, Limit, Protect
Power Socket:
Neutrik PowerCon
Power Supply:
switching power supply
Operating Voltage:
100 V AC - 120 V AC, 50 - 60 Hz
200 V AC - 240 V AC, 50 - 60 Hz
Power Consumption (max.):
1000 VA
Cabinet Type:
bandpass
Housing Material:
15 mm plywood
Cabinet Surface:
polyurethane
Cabinet Colour:
black
Subwoofer Dimensions (W x H x D):
620 x 412 x 615 mm
Subwoofer Weight:
40.8 kg
DSP Specifications
DSP Functions:
Limiter, EQ, Compressor, Crossover
Resolution A/D - D/A:
24 Bit - 24 Bit
Sampling Rate:
48 kHz
Noise Ratio:
100 dB