LD SAT242 User Manual - Preventive Measures:
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o
4
PREVENTIVE MEASURES:
1. Please read this information carefully.
2. Keep all information and instructions in a safe place.
3. Please follow the instructions.
4. Please observe all warnings.
5. Use the device only in the intended manner.
6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain
that wall brackets are firmly secured.
Make certain that the unit is installed securely and cannot fall down.
8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that
the device is always installed so that is cooled sufficiently and cannot overheat.
9.Do not place open sources of ignition, e.g., burning candles, on the device.
10.Do not cover ventilation slots.
11.Do not operate the device in the immediate vicinity of water.
12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects filled
with fluids, such as vases or drinking vessels, on top of the device.
13. Make certain that objects cannot fall into the device.
14. Use the device only with accessories with which the manufacturer intends the device to be used.
15. CAUTION: If your device is equiped with an IEC socket (PROTECTION CLASS I), it must be connected to a
mains socket with a protective ground connection. Never disable the function of the protective ground connection
of the included power cord.
If the plug on the included cord does not fit your mains outlet, contact your electrician.
16. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at
the device plug and the power plug.
17. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once
you have connected the device.
18. When connecting the device, make certain that the power plug remains readily accessible.
19. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.
20. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked
in order to disconnect it. This also means that a tug on the power cord can pull the device out of place, thus
causing personal injuries and/or property damage. Thus please make certain to route your cables carefully.
21. If there is a risk of lighting strike or during extended periods of disuse, unplug the power plug.
22. During transport, make certain that the equipment being transported cannot fall down and possibly cause
personal injuries and/or property damage.
23. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or
if it has been damaged in some other manner, turn the device off immediately und unplug the power plug. This
device should be repaired only by authorized experts.
24. Use only a dry cloth to clean the device.
25. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate
plastic and paper/cardboard.
26. Plastic bags must be kept out of the reach of children.