LDG RVS-8 Manual - page 9

9

Operation 

On power-up, the display shows a title screen and current firmware version for a few seconds, 

then the default screen: "Current Voted". The currently voted receiver is displayed. As the 

repeater operates, the red COR LED on the front panel will light when the repeater is activated. 

The Current Voted display  continuously updates as the system switches from receiver to 

receiver. 

Several other useful items of information are available on the LCD display. Press the 

Menu

button to display the following: 

Current CORs: displays the CORs that are presently active, showing a received signal on that 

receiver. 

Signal / Noise: displays the signal to noise ratio of each channel. Press the 

Selection

 button to 

view this information for each channel (receiver). The value displayed is between 0 and 255, with 

255 representing the highest ratio (also the best signal).