Le Club HEZO300ZR User Manual - 4 - Internal Menu
English
HEZO300ZR
-Moving head with 19 x 15W 4-in-1 RGBW LEDs, pixel and zoom
Page 6
4 - Internal menu
4.1 - Menu tree and functions
Menu
Sub-menu
Action
DMX Functions
DMX Address
Allows you to configure the DMX address. Values can be set from 001 to 512.
DMX Channel Mode
Allows you to decide how many DMX channels will be available
DMX modes:
Mode 01 (1ch)
: 1 DMX channel
Mode 04 (22ch)
: 22 DMX channels
Mode 06 (30ch)
: 30 DMX channels
Mode 08 (32ch)
: 32 DMX channels
View DMX Value
Allows you to visualise the DMX value of each function
Show Setting
Blackout
Enable Blackout mode when the HEZO300ZR is turned on
Show Mode
Selects from show 1 to 8
Slave Mode
Selects:
-
Master: The HEZO300ZR is in master mode.
-
Slave 1: The HEZO300ZR is in slave mode and reacts exactly like the master.
-
Slave 2: The HEZO300ZR is in slave mode and its movements are reversed
compared to the master device.
Sound Mode
Activates or deactivates music-sensitive mode
Sound Sense
Adjusts the sensitivity of the music-sensitive mode
Fixture Setting
Pan Inverse
Activates or deactivates the revert PAN mode
(Yes/No)
Tilt Inverse
Activates or deactivates the revert TILT mode
(Yes/No)
P/T Feedback
Activates or deactivates feedbacks from the projector regarding PAN and TILT
movements
(Yes/No)
BL.O. P/T Moving
Activates or deactivates black-out during PAN and TILT movements
(Yes/No)
Upon initialisation, the display will indicate:
Initial
The projector initialises the functions of the internal program.
It will then enter standby mode and indicate:
DMX Address
Base XX°C
001
Md. X XXCh.
LED XX°C
The projector is now ready to be used.