Le Maitre G300 Operation Manual - page 12
Maintenance
The casing of the G300 is steel with a powder paint coating. To clean simply wash with
mild soap and warm water.
Periodically check to ensure that the fluid pick up filter screen is in place and clean from
debris.
Using high quality Le Maitre fluid should result in a long heat exchanger life however we
recomment that our EZ Kleen Preventative Maintenance fluid be run through the fog
machine on a regular basis - every month for about 5 - 10 minutes, depending on how
heavily the G300 is used; to help prevent blockages.
Recommended Fluids
This fluid has been our long standing blend. It is a clean, white, practically odourless
fog. It is used for many applications where a cloud of fog is required with a medium hang
time.
This is a brand new blend. We have had many compliments on our fog fluid but many
of our customers would like it to hang longer so we introduced the "Long Lasting Fluid".
It is still odourless but a little less white than our "Fog Fluid". It hangs in the air 2 - 3
times longer than the above "Fog Fluid".
Exterior:
Fluid Pick up:
Heat Exchanger:
Fog Fluid
Long Lasting Fluid
Quick Dissipating
10
We have been mixing this for some time for our special effects people working in the
movies. We have decided that there are many other applications for this fluid. When
using this in the LSX or LSG you will find it works very well if you are having problems
with the smoke rising too quickly. It has also been used for quick burst-of-steam effects,
nitrogen bursts, etc. It will dissipate at about twice the rate of the "Molecular Fluid".