Leading Edge HX8410 User Manual - page 9
♦ It is the shop owner’s responsibility to make sure that everyone who is involved in installing and
operating the machine is thoroughly acquainted with the installation, operation, and safety instructions
provided with the machine BEFORE they perform any actual work. The ultimate responsibility for
safety rests with the shop owner and the individuals who work with the machine.
♦ This machine is automatically controlled and may start at any time.
♦ This machine can cause severe bodily injury.
♦ Do not operate with the doors open.
♦ Avoid entering the machine enclosure.
♦ Do not operate without proper training.
♦ Always wear safety goggles.
♦ The electrical power must meet the specifications in this manual. Attempting to run the machine from
any other source can cause severe damage and will void the warranty.
♦ Do not attempt to operate the machine before all of the installation instructions have been completed.
♦ Never service the machine with the power connected.
♦ Improperly clamped parts machined at high speeds/feeds may be ejected and puncture the safety
door. Machining oversized or marginally clamped parts is not safe.
♦ Windows must be replaced if damaged or severely scratched - Replace damaged windows
immediately.
♦ Do not process toxic or flammable material. Deadly fumes can be present. Consult material
manufacturer for safe handling of material by-products before processing.
♦ The spindle head can drop without notice. Personnel must avoid the area directly under the spindle
head.