User manual www.Leatt-brace.Com ™.
The leatt-brace® cannot protect against all possible impacts and/or injuries. Although the leatt-brace® is designed to help reduce the risk of such injuries, there is no guarantee that any injury will be prevented by the use of this equipment. Perform any motor sport activity with caution and use/we...
™ adventure™ exploded view 03 04 1 - adventure front component 1 2 - adventure front padding 1 3 - button head cap screw m4 x 10mm 8 4 - step washer 2 5 - hinge lever assembly 2 6 - stainless steel washer 5 7 - pin 3 pairs 8 - adventure thoracic padding 1 9 - adventure thoracic component 1 10 - stru...
Step 1 your adventure™ brace is supplied with three pairs of different sized pins for adjustment. The medium pin is fi tted as standard. To begin with, fi t your brace without the thoracic assembly on your shoulders and chest as shown below in figure 2. Adjustment with pins if the brace is too loose...
™ 07 08 step 2 now attach the strut onto the thoracic assembly as shown in figure 6. You have been supplied with a 10 degree strut and a 7 degree wedge. We recommend that you start with the standard 10 degree strut (figure 6a.) this is the most commonly fi tted strut for average sized riders. 7 degr...
Fitting the adventure™ brace with a roost guard when wearing a roost guard, the lower portion of the front assembly of the brace should be placed inside the roost guard and the upper portion of the front assembly should be outside the roost guard (figure 9a). The same applies to the back upper and l...
™ chest strap once your adventure™ brace is set up correctly to your body size and shape, attach the chest strap (see figure 11a). The chest strap can provide additional stability and comfort. The back portion of the chest strap has controlled stretch and should be attached with the velcro ® on the ...
Looking after your leatt-brace ® you may want to wash your leatt-brace ® after hard riding. The brace and integrated padding can be washed with a gentle soap or detergent in cold water, rinsed in cold water and dried with a cloth. Common substances applied to this brace [solvent, cleaners, hair toni...
Contact details leatt ® corporation, south african branch unit 1, kyalami plaza, kyalami drive killarney gardens, cape town, 7441, south africa tel: +27 21 556 5409, fax: +27 21 557 3925 email: info@leatt-brace.Com website: www.Leatt-brace.Com postal address: suite 109, private bag x3 bloubergrant, ...
