Lectrosonics SMDWB Instruction manual - page 2
SMWB Series
LECTROSONICS, INC.
2
Consumer Alert for US Users - FCC Order DA 10-92
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system
without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power
level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers
should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to
change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone
website at www.fcc.gov/cgb/wirelessmicrophones. To operate wireless microphone systems at power greater than 50mW, you
must qualify as a Part 74 user and be licensed. If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/
Form601/601.html
Table of Contents
Introduction ............................................................................ 3
About Digital Hybrid Wireless
® ................................................................................3
Servo Bias Input and Wiring ................................................ 3
DSP-controlled Input Limiter ................................................ 3
Recorder function ................................................................. 3
Features .................................................................................. 4
Battery Status LED Indicator ............................................... 4
Battery Installation ................................................................ 5
Turning Power ON ................................................................. 6
Short Button Press ............................................................... 6
Long Button Press ............................................................... 6
Transmitter Operating Instructions ..................................... 7
Record Operating Instructions ............................................. 7
SMWB Main Menu .................................................................. 8
SMWB Power Button Menu ................................................... 9
Setup Screen Details .......................................................... 10
Locking/Unlocking Changes to Settings............................. 10
Main Window Indicators ..................................................... 10
Connecting the Signal Source ........................................... 10
Using Line Level and Instrument Inputs ............................ 10
Turning Control Panel LEDs ON/OFF ................................ 10
Helpful Features on Receivers ........................................... 10
Files ................................................................................... 10
Record or Stop .................................................................. 11
Adjusting the Input Gain ..................................................... 11
Selecting Frequency .......................................................... 11
Selecting Frequency Using Two Buttons ............................ 12
About Overlapping Frequency Bands ................................ 12
Selecting the Low Frequency Roll-off ................................ 12
Selecting the Compatibility (Compat) Mode ....................... 12
Selecting Step Size ............................................................ 13
Selecting Audio Polarity (Phase) ........................................ 13
Setting Transmitter Output Power ...................................... 13
Recorded File Naming ...................................................... 13
SD Info ............................................................................... 13
Restoring Default Settings ................................................. 13
FCC Notices:
For body worn operation, this transmitter model has been tested and meets the FCC RF exposure guidelines
when used with the Lectrosonics accessories supplied or designated for this product. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines. Contact Lectrosonics if you have any questions
or need more information about RF exposure using this product..
This device complies with FCC radiation exposure limits as set forth for an uncontrolled environment. This
device should be installed and operated so that its antenna(s) are not co-located or operating in conjunction
with any other antenna or transmitter.
5-Pin Input Jack Wiring ....................................................... 14
Microphone Cable Termination
for Non-Lectrosonics Microphones ............................ 15
Input Jack Wiring for Different Sources ............................ 16
Microphone RF Bypassing ................................................. 17
Line Level Signals .............................................................. 17
Firmware Update ................................................................. 18
Troubleshooting ................................................................... 20
Specifications ...................................................................... 21
Service and Repair .............................................................. 22
Returning Units for Repair ................................................. 22