W w w . P r o l i g h t . C o . U k alu zoom par 64 order code: ledj114 user manual.
Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...
Alu zoom par 64 safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains ...
You should find inside the ledj carton the following items : 1, alu zoom par 64 unit 2, instruction manual technical specifications: dmx channels: 6 voltage: ac 240 ~ 50hz 24 ultra bright 3w leds (r: 8 , g: 8 , b: 8 ) power consumption: 75w beam angle: 10˚ - 60˚ (adjustable) connection: 3-pin xlr bu...
Overview: 1, dmx output 2, dmx input 3, led display 4, power cable 5, fuse (1a/240v) setup operating instructions the alu zoom par 64 is a dmx-512 controllable, full rgb colour mixing par can made up of high efficiency and super bright 3w led’s. There are three colour groups (red, blue and green) wh...
Alu zoom par 64 operations 1, static colour mode mode button - by pressing the “mode” button under the led display, the led display will show “cl0”, then you can select one of the 7 static colours using the “up” and “down” buttons. The colours range from 1 - 7 and are listed below: 1, red 2, green 3...
9). Dmx mode to access the 6 channel dmx mode, press the mode button until the led display shows “001 - 512” (dmx address), this unit occupies 6 dmx channels. The dmx values and functions are as follows. 10). Led display on/off this unit has two led display options: 1, once the unit is turned on, pr...
Alu zoom par 64 dmx setup data cable (dmx cable) requirements (for dmx operation): • the alu zoom par 64 can be controlled via dmx-512 protocol. The dmx address can be set on the back of the fixture. Your fixture and your dmx controller require a standard 3-pin xlr connector for data input/output (f...
Technical specifications weight & dimensions • length…..............................................................................................................................300mm • width..............................................................................................................
