Ledj ALU ZOOM PAR 64 User Manual - page 7
9). DMX mode
To access the 6 channel DMX mode, press the
MODE button until the LED display
shows
“001 - 512” (DMX address), this unit occupies 6 DMX channels. The DMX values and
functions are as follows.
10). Led display ON/OFF
This unit has two LED display options:
1, Once the unit is turned on, press the
“MODE” button plus the “UP” button, and the LED
display will always stay on.
2, Once the unit is turned on press the
“MODE” button plus the “DOWN” button, and if no
operations are selected within 20 seconds, the LED display will turn off automatically.
11) Zoom adjustment mode
To operate the zoom adjustment mode, press and hold the
“MODE” button until the LED display
shows
“OTr”, after a short duration the LED display will change to show “XXX”, now you can
enter a value from 0 - 42 (0 = Wide and 42 = Narrow). Also in this mode, you can adjust the
running position of the Zoom adjustment by using the
“UP” and “DOWN” buttons. To exit this
mode, press and hold the
“MODE” button again and the LED display will show the running status.
DMX-512:
• DMX (Digital Multiplex) is a universal protocol used as a form of communication between
intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the
controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the
DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have
a data “out” terminal).
DMX Linking:
• DMX is a language allowing all makes and models of different manufactures to be linked together
and operate from a single controller, as long as all fixtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX fixtures try to use the
shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be
placed anywhere in the DMX line. When a fixture is assigned a DMX address of 1, the DMX
controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in
the DMX chain.
Alu Zoom Par 64
Operations
ZOOM ADJUSTMENT