Www.Prolight.Co.Uk (order code: ledj208) user manual.
Quad illuminator safety 1. Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Input voltage of 110~240v safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - follow t...
Quad illuminator safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains...
Introduction features • 4 x 8w quad-colour leds • beam angle: 25 degrees • 400hz refresh rate • 0-100% dimming and variable strobe • dmx channels: 3/4 or 7 selectable • static colour, colour change, colour fade, master/slave and dmx modes • 4 push button menu with lcd display • ip rated power in/out...
Quad illuminator operation modes operation modes built-in programmes: to activate the units built-in programmes, press the “mode” button to show “1.Static” on the lcd screen. Press the “enter” button to choose between the 4 built-in programmes by using the “up” and “down” buttons. Now press the “ent...
3 channel mode dmx chart 4 channel mode dmx chart 7 channel mode dmx chart dmx set up dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixtu...
6. I.R remote (purchased separately: ledj90c) functions: the “blackout” button is used to set the leds into the power on or off modes. The “s pr” button is used to run the built-in programmes. To go though the built-in programmes, press the “+” and “-” buttons. The “fl” button is used to set the led...
Quad illuminator dmx set up dmx linking: • dmx is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller, as long as all fixtures and the controller are dmx compliant. To ensure proper dmx data transmission, when using several dm...
