Ledj Quad illuminator User Manual - page 4
Introduction
Features
• 4 x 8W quad-colour LEDs
• Beam angle: 25 degrees
• 400Hz refresh rate
• 0-100% dimming and variable strobe
• DMX channels: 3/4 or 7 selectable
• Static colour, colour change, colour fade, master/slave and DMX modes
• 4 push button menu with LCD display
• IP rated power in/out sockets
• IP rated 3-pin DMX in/out sockets
• Optional I.R remote (LEDJ90C)
• Power consumption: 35W
• Power supply: 100-240V~50/60Hz
• IP rating: IP-65
• Dimensions: 276 x 159 x 125mm
• Weight: 3.4Kgs
Overview
Setup
Operating Instructions
The Quad illuminator is a DMX-512 controllable unit made up of high efficiency RGBW LEDs and
will operate in stand alone, master/slave, or DMX control modes.
NOTE: This unit has a password and locks after being unused for several minutes, to unlock the
unit again press the buttons in the following order,
“UP”, “DOWN”, “UP”, “DOWN” followed by
“ENTER”.
Identification:
1, Tightening Knobs
2, LCD display
3, Power in
4, DMX in
5, DMX out
6, Power out
7, Mode button
8, Enter button
9, Up button
10, Down button
Quad illuminator
Introduction
3.